Archive
Microtronik - Autohex II BMW Standard And ISN Tricore Boot Mode - Key Programmer and Diagnostics
Microtronik - Autohex II BMW Standard And ISN Tricore Boot Mode - Key Programmer and Diagnostics
Couldn't load pickup availability
This is an Autohex II BMW Standard And ISN Tricore Boot Mode
This tool covers most diagnostic and programming for BMW vehicles.
What you get:
- Autohex II Hardware WVCI HW 5.
- BMW Software Standard License.
- BMW Software ISN Boot Mode License.
- BMW ISTA/D driver to run dealer software.
- OBD Cable
- Tricore Cable
- FEM Cable
- USB Cable
- Power Adapter
- 1 year technical support.
- 1 year hardware warranty.
Using this kit you can do following:
| Read and Write All ISN in F Series: |
Autohex II reads and writes all ISN of DME/DDE in F series:
|
| Read and Write All Long ISN in E Series: |
Autohex II reads all ISN of DME/DDE in E series:
|
| Read most of old ISN in E Series: |
Autohex II reads the ISN of DME/DDE in E series:
|
| CAS1, CAS2, CAS3, CAS3+, CAS4 and CAS4+ ISN | With Autohex II you can read and write ISN from all CAS versions in E and F series |
| Read ISN from all Trciore DME/DDE by boot mode | This function is important when the DME/DDE is not responding, and you need the ISN for replacment |
| BMW E series EGS ISN matching with CAS | You can reset EWS security from all BMW E series EGS by OBD |
| BMW F series EGS EWS Reset for 6HP and 8HP models | You can reset EWS in EGS 6HP (On Bench) and 8HP by OBD or On Bench |
| BMW E series, F series, and G series Auto Coding | Autohex II calculates the required coding data automatically from the car vehicle order, then it applies these data to the target module |
| Managing the Vehicle Order (FA) in BMW cars | You can modify the Vehicle Order to do retrofit the configuraion. You can also backup and restore the FA from the backup ECU |
| Unlock Security from CAS4, CAS4+, FEM and BDC |
You can unlock security of CAS4/4+, BDC and FEM to able to:
|
| Read and Write ISN on Bench for MSX8X | With Autohex II you can read ISN of MSD80, MSD81, MSD85, MSD85Y, MSD87, MSV90 in E/F series on Bench without opening the Ecu. |
Specifications Table:
| FEATURES INCLUDED IN THIS PACKAGE | |
|---|---|
| Autohex | |
| Ecu Coding | YES |
| Read ISN DME and CAS | YES |
| Write ISN DME and CAS | YES |
| Read ISN From EGS 6HP/8HP | YES |
| Reset EGS EWS 6/8 HP | YES |
| CAS4/FEM/BDC Mileage Reset | YES |
| CAS/FEM/BDC Replacment | YES |
| Vehicle Order (FA) Manager | YES |
| DME ISN By Boot Mode | YES |
| Online Ecu Programming | NO |
| Ecu Advanced Coding | NO |
| Read CAS2,3,4,4+ Flash (BDM) | NO |
| CAS1,2,3,4 Key Programming | NO |
| FEM/BDC Key Programming | NO |
| Hextag Tool Included | NO |
| Technical Support | 1 year manufacturer support (Extendable) |
Share
